進口焊接式高壓電動截止閥 特點 Characteristics of Imported Welded High Pressure Electric Stop Valve

適用介質：水、油、空氣等與閥門材質相容的非腐蝕性液體或氣體 

閥門耐壓較高，可手動應急開關 

介質流動方向及安裝：單向流動(水平安裝或出口       向上豎直安裝) 電動截止閥 帶手輪執行器(可選) 

Applicable medium: water, oil, air and other non corrosive liquids or gases compatible with valve materials

The pressure resistance of the valve is high, and it can be manually opened and closed. Imported welded high-voltage electric stop valve 2.jpg

Medium flow direction and installation: one-way flow (horizontal installation or outlet upward vertical installation) electric stop valve with handwheel actuator (optional)

進口焊接式高壓電動截止閥技術參數 Technical Parameters of Imported Welded High Pressure Electric Stop Valve

接口形式：焊接式(可拆卸) 

閥體材料：不銹鋼 304，連接支架為防腐鋁 

閥體密封：丁腈橡膠 

閥瓣密封：聚氨脂 PU 

介質溫度：-25℃～+80℃ 

環境溫度：-25℃～+60℃ 

公稱壓力：160bar

工作電壓：直流 24VDC 

開關時間：9 秒(DN15～32)，13 秒(DN40～50)

帶手輪執行器(可選)

Interface type: welded (removable)

Valve body material: stainless steel 304, connecting bracket is anti-corrosion aluminum

Valve body seal: nitrile rubber

Disc seal: polyurethane PU

Medium temperature: - 25 ℃~+80 ℃

Ambient temperature: - 25 ℃~+60 ℃

Nominal pressure: 160bar

Working voltage: DC 24VDC

Switching time: 9 seconds (DN15 ～ 32), 13 seconds (DN40 ～ 50)

Actuator with handwheel (optional)