(CTS)進口手動操作氣動執行器將齒條齒輪機構與手動離合器機構集成一體 ，除了保留齒條齒輪式氣動執行器的各 項功能外，增加了氣動執行器的現場手動功能和0°- 90°間任意位置的閥位調節、限位和鎖緊功能

CTS manual operation pneumatic actuator integrates the rack and pinion mechanism with the manual clutch mechanism. In addition to retaining the functions of the rack and pinion pneumatic actuator, the on-site manual function of the pneumatic actuator and the valve position adjustment, limit and locking functions at any position between 0 ° - 90 ° are added

(CTS)進口手動操作氣動執行器 特性介紹  Introduction to characteristics of manual pneumatic actuator

1.將氣動執行器與手動離合器機構集成一體 ，高精度 低成本地實現了控制閥的現場緊急制動 The pneumatic actuator is integrated with the manual clutch mechanism, and the on-site emergency braking of the control valve is realized with high precision and low cost

2.適用于雙作用和單作用功能，單作用功能最多可裝 12根回復彈簧 It is applicable to double acting and single acting functions, and the single acting function can be equipped with up to 12 return springs 

3.產品依據ISO/NAMUR國際標準設計制造，能與各種 附件無縫連接和安裝 The product is designed and manufactured according to iso/namur international standards, and can be seamlessly connected and installed with various accessories 

4.具有行程末端0±5°和90±5°調節與限位  It has 0 ± 5 ° and 90 ± 5 ° adjustment and limit at the end of stroke

5.可輕松實現0°- 90°間任意位置的限位、調節和鎖緊功能  It can easily realize the limit, adjustment and locking functions at any position between 0 ° - 90 °

6.可實現0°- 90°間任意位置的授權鎖位 It can realize authorized locking at any position between 0 ° - 90 °

(CTS)進口手動操作氣動執行器 工作原理 Working principle of manual pneumatic actuator

（1）0° - 90°的氣動工作狀態：該氣動工作是CTS系列手操氣動執行器最基本的氣動工作形式。通過旋轉手輪將保護套視窗槽中的紅色指示 器移到中間的氣動位置（見下圖），此時手操氣動執行器 進入0° - 90°的氣動工作狀態。值得注意的是行程末端0±5°和90±5°調 節的調節是通過缸體側面的二個調節螺釘實現的 。

 0 ° - 90 ° pneumatic working state: this pneumatic work is the most basic pneumatic working form of CTS series manual pneumatic actuators. Turn the hand wheel to move the red indicator in the window slot of the protective sleeve to the middle pneumatic position (see the figure below). At this time, the manual pneumatic actuator enters the pneumatic working state of 0 ° - 90 °. It is worth noting that the adjustment of 0 ± 5 ° and 90 ± 5 ° adjustment at the end of the stroke is achieved by two adjusting screws on the side of the cylinder block.

（2）0° - 45°的氣動工作狀態：該氣動工作是CTS系列手操氣動執行器 較為特殊的氣動工作形式。通過旋轉手輪將保護套視窗槽中的紅色 指示器移到左邊開向限位區（見下圖），此時手操氣動執 行器進入0° - 45°的氣動工作狀態。值得注意的是45度的開向限位是由手輪機構提供的。

0 ° - 45 ° pneumatic working state: this pneumatic work is a special pneumatic work form of CTS series manual pneumatic actuators. Rotate the hand wheel to move the red indicator in the window slot of the protective sleeve to the left opening limit area (see the figure below), and then the manual pneumatic actuator enters the pneumatic working state of 0 ° - 45 °. It is worth noting that the 45 degree open limit is provided by the handwheel mechanism.

（3）45° - 90°的氣動工作狀態：該氣動工作是CTS系列手操氣動執行 器較為特殊的氣動工作形式。通過旋轉手輪將保護套視窗槽中的紅色指示器移到右邊關向限位區（見下圖），此時手操氣 動執行器進入45° - 90°的氣動工作狀態。值得注意的是45度的關向限 位是由手輪機構提供的

45 ° - 90 ° pneumatic working state: this pneumatic work is a special pneumatic work form of CTS series manual pneumatic actuators. Rotate the hand wheel to move the red indicator in the window slot of the protective sleeve to the right closing limit area (see the figure below). At this time, the manual pneumatic actuator enters the pneumatic working state of 45 ° - 90 °. It is worth noting that the 45 degree closing limit is provided by the handwheel mechanism

 45° 是一個非標限位概念，可根據現場要求在 5° - 85°間選定需要的限位位置  45 ° is a non-standard limit concept, and the required limit position can be selected between 5 ° - 85 ° according to the site requirements

順時針關閉閥門 Close the valve clockwise

逆時針打開閥門 Open the valve counterclockwise

產品結構和零部件材料