(ASME,API,ANSI)美標球閥
簡要描述：RETZ進口ASME,API,ANSI美標鋼制球閥在全開或全閉時，球體和閥座的密封面與介質隔離，主要用切斷流體，關閉件是個球體，球體繞閥體中心線作旋轉來達到開啟
品牌：RETZ- 工況條件：開啟/截止
- 溫度/壓力：P-T: 50bar@180℃
- 更新時間：2022/11/02
(ASME,API,ANSI)進口美標鋼制球閥性能描述 Performance description
(ASME,API,ANSI)美標鋼制球閥閥芯從結構上看，密封時球體閥座嵌在閥體側閥座上，開閉操作通過將手柄旋轉 90 度，可使流體停止流動 RETZ (ASME,API,ANSI) ball valve core From the structure, when sealing, the ball valve seat is embedded in the valve seat at the side of the valve body. The opening and closing operation can stop the flow of fluid by rotating the handle 90 degrees
 |  |
規范及規格參數 Specifications and specifications
設計標準 Design Rating∶ASME B 16.34 
結構長度 Face to Face∶ASME B16.10
法蘭標準 Flanged Ends∶ASME B16.5
檢查和試驗 Inspection & Testing∶API 598
公稱壓力 Nominal Pressure：CL150～CL300
規格尺寸 Size：1/2～8”
適用溫度 Temperature: -40～180℃
(ASME,API,ANSI)進口美標鋼制球閥零部件材質表 Parts material table
No. | 零件名稱PAPT NAME | 材質MATERIAL | ||
1 | 螺栓Screw | B7 | SS304 | |
2 | 墊片Washer | 1020 | SS304 | |
3 | 手柄Handle | WCB | ||
4 | 擋圈Retaining ring | 65Mn | SS304 | |
5 | 限位塊Orientation patch | 1020 | SS304 | |
6 | 螺釘Screw | B7 | SS304 | |
7 | 填料壓蓋Gland | WCB | CF8 | |
8 | 填料Packing | PTFE | ||
9 | 止推墊Thrust Gasket | PTFE | ||
10 | 閥桿Stem | 304 | F304/316 | |
11 | 密封墊Gasket | PTFE | ||
12 | 閥蓋Bonnet | WCB | CF8/CF8M | |
13 | 螺母Nut | 2H | SS304 | |
14 | 螺柱Stud | B7 | SS304 | |
15 | 球體Ball | 304 | F304/316 | |
16 | 閥體Body | WCB | CF8/CF8M | |
17 | 閥座Seat | PTFE/PPL | ||
在線客服