產品用途 Product use

1..適用于聯結空間同一平面上兩軸夾角每節極限轉動角度為45度，允許使用角度30度以內 Applicable to the included angle of two shafts on the same plane of the connecting space. The limit rotation angle of each section is 45 degrees, and the allowable angle is within 30 degrees

2.所提供的快速鎖緊裝置僅有公差為H7的成品孔，帶標準的鍵槽或六角孔可選，可非標定制不同安裝結構 The provided quick locking device only has finished hole with tolerance of H7, with standard keyway or hexagonal hole optional, and different installation structures can be customized non-standard

3.結構簡單,關節可拆卸,易維護,傳動效率高 Simple structure, detachable joint, easy maintenance, high transmission efficiency

4.可伸縮,連接更大的軸間距 Scalable, connecting with larger axle spacing

5.關節精密配合，間隙小 Joint precision fit, small clearance

6.噪音小，使用壽命長 Low noise, long service life

結構特點 Structural features

1.使用兩軸不同一軸線，存在軸線夾角的情況下能實現所聯接的兩軸連續回傳，并可靠的傳遞轉矩運動，具有較大的角度補償能力最大30度夾角下使用 When two axes are different from one axis and there is an included angle between the axes, it can realize the continuous transmission of the two connected axes, and reliably transmit the torque movement. It has a large angle compensation ability and can be used at the maximum included angle of 30 degrees

2.結構簡單關節可以拆卸，可伸縮易與維護傳動效率高，成品孔H7可根據要求，開鍵槽，銷孔，六方孔和四方孔 The structure is simple, the joint can be disassembled, the expansion is easy, and the maintenance and transmission efficiency is high. The finished hole H7 can be provided with keyway, pin hole, hexagonal hole and square hole according to the requirements

3.材質可做304不銹鋼 表面常規發黑，可按照要求鍍鎳鍍鋅磨光 The material can be made of 304 stainless steel, and the surface can be blackened regularly, and can be polished by nickel plating and zinc plating as required

基本參數和尺寸 Basic parameters and dimensions