圓形單膜片夾緊聯軸器(鋁合金)
簡要描述:RETZ進口圓形單膜片夾緊聯軸器(鋁合金)扭矩剛性高,能準確控制周的旋轉,可進行高精度控制,低慣量,適應于高速運轉
品牌:RETZ
工況條件:聯接機械
溫度/壓力:0.3-60N.m.
更新時間:2023/02/27
產品用途 Product use
1.扭矩剛性高,能準確控制周的旋轉,可進行高精度控制 High torque rigidity, can accurately control the rotation of the circle, and can carry out high-precision control
2.無間隙的軸和軸套連接,適用于正反轉 The shaft is connected with the shaft sleeve without clearance, which is suitable for forward and reverse rotation
3.低慣量,適應于高速運轉,夾緊螺絲固定方式 Low inertia, suitable for high-speed operation, clamping screw fixation
4.軸套采用高強度聯軸器專用鋁合金 The shaft sleeve is made of special aluminum alloy for high-strength coupling
5.膜片采用304不銹鋼 The diaphragm is made of 304 stainless steel
6.無間隙的軸和軸套連接,適用于正反轉 The shaft is connected with the shaft sleeve without clearance, which is suitable for forward and reverse rotation
7.低慣量,適應于高速運轉 Low inertia, suitable for high-speed operation
結構特點 Structural features
1.軸套采用高強度鋁合金 The shaft sleeve is made of high-strength aluminum alloy
2.圓形膜片采用304不銹鋼 The round diaphragm is made of 304 stainless steel
3.扭矩剛性高,能準確控制軸的旋轉,可進行高精度控制 High torque rigidity, accurate control of shaft rotation and high-precision control
4.專為伺服,步進電機設計 Designed for servo and stepping motor
5.無間隙的軸和軸套連接,適用于正反轉 The shaft is connected with the shaft sleeve without clearance, which is suitable for forward and reverse rotation
6.低慣量,適用于高速運轉 Low inertia, suitable for high-speed operation
7.夾緊螺絲緊固方式 Fastening method of clamping screw
基本參數 Basic parameters and dimensions
參數 | 額定 | 容許 | 容許 | 容許軸 | 容許 | 靜態扭 | 慣性矩 | 軸套 | 彈片 | 表面 | 重量 |
DSN-12×13 | 0.3 | 0.02 | 0.5 | ±0.05 | 15000 | 104 | 4.8×10ˉ8 | 高強度鋁合金 | sus3o4不銹鋼 | 陽極氧化處理 | 4 |
DSN-16×16.5 | 0.6 | 0.02 | 0.5 | ±0.10 | 15000 | 300 | 9.8×10ˉ8 | 8 | |||
DSN-19×20 | 1 | 0.02 | 1 | ±0.10 | 15000 | 600 | 2.9×10ˉ7 | 13 | |||
DSN-25×24 | 2 | 0.02 | 1 | ±0.20 | 15000 | 1300 | 1.1×10ˉ6 | 25 | |||
DSN-28×28 | 2.2 | 0.02 | 1 | ±0.20 | 10000 | 1600 | 1.4×10ˉ6 | 34 | |||
DSN-32×29 | 4.2 | 0.02 | 1 | ±0.30 | 10000 | 2500 | 4.0×10ˉ6 | 57 | |||
DSN-40×33 | 8 | 0.02 | 1 | ±0.30 | 10000 | 4600 | 9.8×10ˉ6 | 86 | |||
DSN-50×42 | 15 | 0.02 | 1 | ±0.30 | 10000 | 6000 | 1.6×10ˉ5 | 130 | |||
DSN-55×45 | 25 | 0.02 | 1 | ±0.40 | 10000 | 14000 | 5.7×10ˉ5 | 201 | |||
DSN-63×46 | 60 | 0.02 | 1 | ±0.50 | 9000 | 24000 | 1.7×10ˉ4 | 300 |
注以上技術參數由至大孔徑測得 Note The above technical parameters are measured from to large aperture
外形尺寸 Overall dimension
參數 | 常用d1,d2,軸徑 | 中D | L | LF | S | F | M | 緊固螺 |
DSN-12×13 | 2,345 | 12 | 13 | 5.6 | 1.8 | 2.2 | M2 | 0.4 |
DSN-16×16.5 | 34,566.35 | 16 | 16.5 | 7.35 | 1.8 | 2.5 | M2 | 0.4 |
DSN-19×20 | 3,4,5,6,6.35,7,8 | 19 | 20 | 9.1 | 1.8 | 3.3 | M2.5 | 0.8 |
DSN-25×24 | 3,4,5,6,6.35,7,8,9,9.525,10,11,12, | 25 | 24 | 10.7 | 2.6 | 3.9 | M3 | 1.2 |
DSN-28×28 | 3,4,5,6,6.35,7,8,9,9.525,10,11,12,12.7 | 28 | 28 | 12.7 | 2.6 | 3.9 | M3 | 1.2 |
DSN-32×29 | 3,4,5,6,6.35,7,8,9,9.525,10,11,12,12.7,14,15,16 | 32 | 29 | 12.75 | 3.5 | 4.5 | M4 | 2.5 |
DSN-40×33 | 8,9,9.525,10,11,12,12.7,14,15,16,17,18,19 | 40 | 33 | 14.25 | 4.5 | 5 | M4 | 2.5 |
DSN-50×42 | 8,9,9.525,10,11,12,12.7,14,15,16,17,18,19,20,22,24 | 50 | 42 | 18.75 | 4.5 | 5 | M4 | 2.5 |
DSN-55×45 | 10,12,14,15,16,17,18,19,20,22,24,25,28,30,32 | 55 | 45 | 19.75 | 5.5 | 6.4 | M5 | 5 |
DSN-63×46 | 12,14,15,16,17,18,19,20,22,24,25,28,30,32,35,38 | 63 | 46 | 19.85 | 6.3 | 7.7 | M6 | 8 |