高靈敏度夾緊是雙膜片聯軸器(鋁合金)
簡要描述：RETZ進口高靈敏度夾緊是雙膜片聯軸器(鋁合金)扭矩剛性高,能準確控制周的旋轉,可進行高精度控制，無間隙的軸和軸套連接,適用于正反轉高速運轉的伺服電機,步進電機
品牌：RETZ- 工況條件：聯接機械
- 溫度/壓力：1-100N.m.
- 更新時間：2023/02/27
產品用途 Product use
1.扭矩剛性高,能準確控制周的旋轉,可進行高精度控制 High torque rigidity, can accurately control the rotation of the circle, and can carry out high-
precision control
2.無間隙的軸和軸套連接,適用于正反轉retz The shaft is connected with the shaft sleeve without clearance, which is suitable for forward and reverse rotation
3.低慣量,適應于高速運轉,夾緊螺絲固定方式 Low inertia, suitable for high-speed operation, clamping screw fixation
4.軸套采用高強度聯軸器專用鋁合金 The shaft sleeve is made of special aluminum alloy for high-strength coupling
5.膜片采用304不銹鋼 The diaphragm is made of 304 stainless steel
結構特點 Structural features
1.扭矩剛性高，能準確控制軸的旋轉，可進行高精度控制 High torque rigidity, accurate control of shaft rotation and high-precision control
2.專為伺服，步進電機設計 Designed for servo and stepping motor
3.無間隙的軸和軸套連接，適用于正反轉 The shaft is connected with the shaft sleeve without clearance, which is suitable for forward and reverse rotation
4.低慣量，適用于高速運轉 Low inertia, suitable for high-speed operation
5.膜片采用彈簧鋼制成，抗疲勞性特好 The diaphragm is made of spring steel with excellent fatigue resistance
6.夾緊螺絲緊固方式 Fastening method of clamping screw
基本參數 Basic parameters and dimensions
參數 | 額定 | 容許 | 容許 | 容許軸 | 最高 | 靜態扭 | 慣性矩 | 軸套 | 彈性體 | 表面 | 重量 |
DLF-19×24.5 | 1 | 0.12 | 1.5 | ±0.18 | 10000 | 170 | 8.19×10ˉ4 | 高強度鋁合金 | sus3o4彈簧鋼 | 陽極氧化處理 | 13.6 |
DLF-26×30 | 1.5 | 0.15 | 1.5 | ±0.3 | 10000 | 820 | 2.7×10ˉ4 | 32 | |||
DLF-32×38 | 3 | 0.17 | 1.5 | ±0.36 | 10000 | 1860 | 1.0×10ˉ4 | 58 | |||
DLF-34×38 | 3 | 0.17 | 1.5 | ±0.36 | 10000 | 1860 | 1.1×10ˉ4 | 71 | |||
DLF-39×47 | 6 | 0.22 | 1.5 | ±0.45 | 10000 | 2860 | 2.7×10ˉ4 | 110 | |||
DLF-44×47 | 9 | 0.22 | 1.5 | ±0.54 | 10000 | 3300 | 3.4×10ˉ4 | 134 | |||
DLF-56×57 | 25 | 0.27 | 1.5 | ±0.72 | 10000 | 9480 | 1.14×10ˉ4 | 298 | |||
DLF-68×68 | 60 | 0.31 | 1.5 | ±0.8 | 10000 | 19000 | 1.8×10ˉ4 | 472 | |||
DLF-82×87 | 100 | 0.55 | 1.5 | ±0.8 | 10000 | 28450 | 2.25×10ˉ4 | 983 |
注：必須在容許值的范圍內使用該聯軸器 Note: The coupling must be used within the allowable range
外形尺寸 Overall dimension
參數 | 常用d1,d2,軸徑 | φD | L | LF | LP | d3 | S | F | M | 緊固螺 |
DLF-19×24.5 | 3,4,5,6,6.35,7,8 | 19 | 24.5 | 9.1 | 2.7 | 9 | 1.8 | 3.3 | M2.5 | 1 |
DLF-26×30 | 5,6,6.35,7,8,9,9.525,10,11,12,12.7 | 26 | 30 | 11.65 | 3.6 | 12.5 | 2.6 | 3.9 | M3 | 1.5 |
DLF-32×38 | 6,6.35,7,8,9,9.525,10,11,12,12.7,14,15 | 32 | 38 | 12.25 | 6.5 | 15 | 3.5 | 3.85 | M3 | 1.5 |
DLF-34×38 | 6,6.35,7,8,9,9.525,10,11,12,12.7,14,15 | 34 | 38 | 12.25 | 6.5 | 16 | 3.5 | 3.85 | M3 | 1.5 |
DLF-39×47 | 6,8,9,9.525,10,11,12,12.7,14,15,16,17,18,19 | 39 | 47 | 14.9 | 8.5 | 19.3 | 4.5 | 5 | M4 | 2.5 |
DLF-44×47 | 6,8,9,9.525,10,11,12,12.7,14,15,16,17,18,19,20,22 | 44 | 47 | 14.9 | 8.1 | 22.5 | 4.5 | 5 | M4 | 2.5 |
DLF-56×57 | 12,14,15,16,17,18,19,20,22,24,25,28,30,32 | 56 | 57 | 19.75 | 6.5 | 32.5 | 5.5 | 6.4 | M5 | 7 |
DLF-68×68 | 16,17,18,19,20,22,24,25,28,30,32,35,38 | 68 | 68 | 23.35 | 8.7 | 38.3 | 6.3 | 7.7 | M6 | 12 |
DLF-82×87 | 17,18,19,20,22,24,25,28,30,32,35,38,40,42 | 82 | 87 | 30 | 11 | 45.5 | 3 | 9.7 | M8 | 20 |
在線客服