單臺階夾緊式單膜片聯軸器(45#)
簡要描述：RETZ進口單臺階夾緊式單膜片聯軸器(45#)低慣量,適應于高速運轉,夾緊螺絲固定方式，無間隙的軸和軸套連接,適用于正反轉
品牌：RETZ- 工況條件：聯接機械
- 溫度/壓力：2.2-150N.m.
- 更新時間：2023/03/05
產品用途 Product use
1.軸套采用45#鋼材質,高精度,大扭矩，膜片采用304不銹鋼 The shaft sleeve is made of 45 # steel, with high precision and large torque, and the 
diaphragm is made of 304 stainless steel
2.通常用于伺服電機，步進電機 Commonly used for servo motor and stepper motor
結構特點 Structural features
1.扭矩剛性高，能準確控制軸的旋轉，可進行高精度控制 High torque rigidity, accurate control of shaft rotation and high-precision control
2.無間隙的軸和軸套連接，適用于正反轉 The shaft is connected with the shaft sleeve without clearance, which is suitable for forward and reverse rotation
3.低慣量，適用于高速運轉，高精度，大扭矩 Low inertia, suitable for high-speed operation, high precision, large torque
4.膜片采用彈簧鋼制成，抗疲勞性特好 The diaphragm is made of spring steel with excellent fatigue resistance
5.夾緊螺絲緊固方式 Fastening method of clamping screw
基本參數 Basic parameters and dimensions
參數 | 額定 | 容許 | 容許 | 容許軸 | 最高 | 靜態扭 | 慣性矩 | 軸套 | 彈性體 | 表面 | 重量 |
DLG-26×35 | 2.2 | 0.12 | 0.5 | ±0.7 | 5000 | 2050 | 4.5×10-5 |
| sus3o4不銹鋼 | 發黑處理 | 95 |
DLG-34×45 | 4.5 | 0.14 | 0.5 | ±0.9 | 5000 | 4535 | 1.65×10-5 | 192 | |||
DLG-39×50 | 9 | 0.18 | 0.5 | ±0.11 | 5000 | 10000 | 4.5×10-5 | 295 | |||
DLG-44×50 | 13 | 0.22 | 0.5 | ±0.13 | 5000 | 11200 | 5.7×10-4 | 360 | |||
DLG-56×64 | 37 | 0.25 | 0.5 | ±0.18 | 4700 | 28000 | 2.1×10-4 | 795 | |||
DLG-68×75 | 90 | 0.45 | 0.5 | ±0.2 | 4500 | 39000 | 2.4×10-4 | 1230 | |||
DLG-82×98 | 150 | 0.45 | 0.5 | ±0.25 | 4000 | 75000 | 3×10-4 | 2532 |
注：必須在容許值的范圍內使用該聯軸器 Note: The coupling must be used within the allowable range
外形尺寸 Overall dimension
參數 | 常用d1,d2,軸徑 | φD | L | LF | LP | d3 | S | F | M | 緊固螺 |
DLG-26×35 | 4,5,6,6.35,7,8,9.525,10,11,12,12.7 | 26 | 35 | 11.4 | 5.8 | 12.5 | 3.2 | 3.9 | M3 | 1.2 |
DLG-34×45 | 6,6.35,7,8,9,9.525,10,11,12,12.7,14,15 | 34 | 45 | 13.95 | 8.9 | 16 | 4.1 | 4.2 | M4 | 2.5 |
DLG-39×50 | 8,9,9.525,10,11,12,12.7,14,15,16,17,18,19 | 39 | 50 | 14.7 | 10.4 | 19.3 | 5.1 | 4.9 | M4 | 2.5 |
DLG-44×50 | 8,9,9.525,10,11,12,12.7,14,15,16,17,18,19,20,22 | 44 | 50 | 14.7 | 10.4 | 22.5 | 5.1 | 5.2 | M4 | 2.5 |
DLG-56×64 | 12,14,15,16,17,18,19,20,22,24,25 | 56 | 64 | 19.45 | 12.9 | 32.5 | 6.1 | 6.8 | M5 | 5 |
DLG-68×75 | 15,16,17,18,19,20,22,24,25,28,30,32,35 | 68 | 75 | 23.55 | 14.1 | 38.3 | 6.9 | 7.7 | M6 | 8 |
DLG-82×98 | 16,17,18,19,20,22,24,25,28,30,35,38,40 | 82 | 98 | 29.7 | 21.4 | 45.5 | 8.6 | 9.3 | M8 | 20 |
在線客服