進口賬套單型彈性膜片聯軸器(45#) 產品用途 Product use

1、適應性強,傳動平穩,能在惡劣的環境下工作.,傳動平穩,節能環保,效率高,無噪聲 Strong adaptability, stable transmission, and can work in harsh environment, Smooth transmission, energy saving and environmental protection, high efficiency and noiseless

2、保護系統,延長壽命.扛沖擊,減振能力強,附加彎矩小 Protection system, extended service life, strong shock absorption ability and small additional bending moment

3、通常用于伺服電機，步進電機連接 Usually used for servo motor and stepper motor connection

廣泛用于各種機械裝置的軸系傳動，如水泵（尤其是大功率、化工泵）、風機、壓縮機、液壓機械、石油機械、印刷機械、紡織機械、化工機械、礦山機械、冶金機械、航空（直升飛機）、艦艇高速動力傳動系統、汽輪機、活塞式動力機械傳動系統、履帶式車輛，以及發電機組高速、大功率機械傳動系統，經動平衡后應用于高速傳動軸系已比較普遍

It is widely used for shafting transmission of various mechanical devices, such as water pumps (especially high-power and chemical pumps), fans, compressors, hydraulic machinery, petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopter), high-speed power transmission system of naval ships, steam turbines, piston-type power mechanical transmission system, tracked vehicles, and high-speed generator sets The high-power mechanical transmission system has been widely used in high-speed transmission shafting after dynamic balancing

結構特點 Structural features

偏心允許范圍大，可使用各種傳動系統 The allowable range of eccentricity is large, and various transmission systems can be used

拆裝迅速，具有很高的裝配重復性 Quick disassembly and assembly with high assembly repeatability

無需潤滑，無澡音，磨損。無滑動，摩擦，傳動部件 No lubrication, no bath sound and wear. No sliding, friction, transmission parts

結構簡單，重量輕，可降低能量損失 Simple structure and light weight can reduce energy loss

不需維護，停機時肉眼可檢查故障 No maintenance is required, and faults can be checked with naked eyes during shutdown

良好的環境適應性，可高溫下運轉 Good environmental adaptability and can operate at high temperature

傳動精度高，可靠性高，壽命長 High transmission accuracy. High reliability and long service life

基本參數 Basic parameters and dimensions

1.聯軸器型號：單型膜片聯軸器DJM ，雙型膜片聯軸器

SJM Coupling model: single type membrane coupling DJM, dual type membrane coupling SJM

2.聯軸器規格代號：聯軸器結構參數用規格代號表示，順序從00到40

Coupling specification code: the structural parameters of the coupling are represented by the specification code in the order from 00 to 40

3.軸孔型式：圓柱型軸孔Y，圓錐型軸孔Z

Shaft hole type: cylindrical shaft hole Y, conical shaft hole Z

4.脹套聯結代號：采用脹套聯結用T表示，不用脹套聯結無"T"符號

Expansion sleeve connection code: T is used for expansion sleeve connection, and there is no "T" symbol for expansion sleeve connection

圓錐軸孔連結單型膜片聯軸器 Conical shaft hole connection single diaphragm coupling

自動控制機械不可缺少的伺服馬達與滾珠絲桿聯結中廣泛應用 The servo motor which is indispensable for automatic control machinery is widely used in the connection of ball screw

脹套聯結，完全消除傳動間隙，拆裝更方便 Expanded sleeve connection, completely eliminate transmission clearance, and make disassembly and assembly more convenient

脹套聯結時，聯結軸公差：軸徑≥38，取h8；軸徑<38，取H6 In case of expansion sleeve connection, the tolerance of coupling shaft: shaft diameter ≥ 38, take h8; Shaft diameter<38, take H6

錐孔聯結時，軸孔直徑指大端尺寸 When connecting with taper hole, the diameter of shaft hole refers to the size of large end

注：必須在容許值的范圍內使用該聯軸器 Note: The coupling must be used within the allowable range