鋁合金頂絲式波紋管聯軸器
簡要描述：RETZ進口鋁合金頂絲式波紋管聯軸器采用一體化結構,整體采用高強度鋁合金,高扭矩,高剛性,專為微型電機,伺服，步進電機，編碼器設計
品牌：RETZ- 工況條件：聯接機械
- 溫度/壓力：0.75-4.5N.m.
- 更新時間：2023/03/17
進口不銹鋼頂絲式波紋管聯軸器 產品用途 Product use
1.軸套材料為鋁合金,中間波紋管我不銹鋼材質,抗腐蝕特性好 The shaft sleeve material is aluminum alloy, and the middle bellows is made of stainless steel, with good corrosion resistance
2.專為微型電機,伺服，步進電機，編碼器設計 Designed for micro motors, servo motors, stepper motors, and encoders
結構特點 Structural features
零回轉間隙,適用于正反轉 Laser welding is used between the bellows and the shaft, with zero rotational clearance, suitable for forward and reverse rotation
波紋管結構更有效的補償徑向，角向，軸向偏差 Bellows structure more effectively compensates for radial, angular, and axial deviations
一體化結構,,高扭矩,高剛性,性型基本不允許偏心,使用時必須充分進行調整 Integrated structure, high torque, high rigidity, basically no eccentricity allowed in performance, and must be fully adjusted during use
夾緊螺絲緊固方式 Fastening method of clamping screw
基本參數 Basic parameters and dimensions
參數 | 額定 | 容許 | 容許 | 容許軸 | 最高 | 靜態扭 | 慣性矩 | 軸套 | 表面 | 重量 |
DPC-16×17.5 | 0.75 | 0.05 | 0.5 | ±0.1 | 8000 | 200 | 2.8×10ˉ? | 高強度鋁合金 | 陽極氧化處理 | 7 |
DPC-19×20 | 1.5 | 0.05 | 0.5 | ±0.1 | 8000 | 270 | 6.2×10ˉ? | 11 | ||
DPC-24×25 | 2.2 | 0.05 | 0.5 | ±0.1 | 6200 | 790 | 2.0×10ˉ? | 22 | ||
DPC-29×30 | 3 | 0.05 | 0.5 | ±0.1 | 5000 | 1400 | 5.2×10ˉ? | 40 | ||
DPC-34×35 | 4.5 | 0.05 | 0.5 | ±0.1 | 4300 | 2200 | 1.1×10ˉ4 | 61 |
注：必須在容許值的范圍內使用該聯軸器 Note: The coupling must be used within the allowable range
外形尺寸 Overall dimension
參數 | 常用d1,d2,軸徑 | φD | L | L1 | L2 | F | M | 緊固螺 |
DPC-16×17.5 | 3,4,5,6 | 16 | 17.5 | 0.55 | 1.18 | 3 | M2.5 | 1 |
DPC-19×20 | 3,4,5,6,6.35,7,8 | 19 | 20 | 0.55 | 1.18 | 3.4 | M2.5 | 1 |
DPC-24×25 | 4,5,6,6.35,7,8,9,10,11 | 24 | 25 | 0.55 | 1.49 | 4.25 | M3 | 1.5 |
DPC-29×30 | 5,6,6.35,7,8,9,10,11,12,12.7 | 29 | 30 | 0.55 | 1.81 | 5.1 | M3 | 1.5 |
DPC-34×35 | 8,9,9.525,10,11,12,12.7,14,15,16 | 34 | 35 | 0.8 | 2.09 | 6 | M3 | 1.5 |
在線客服