平行線頂絲式聯軸器(不銹鋼)
簡要描述：RETZ進口平行線頂絲式聯軸器(不銹鋼)采用一體化結構,夾緊螺絲緊固方式，專為微型電機,伺服，步進電機，編碼器設計
品牌：RETZ- 工況條件：聯接機械
- 溫度/壓力：0.75-9.7N.m.
- 更新時間：2023/03/17
進口平行線頂絲式聯軸器(不銹鋼) 產品用途 Product use
1.整體采用不銹鋼材料 ，抗腐蝕性能好 The overall use of stainless steel materials, good corrosion resistance
2.專為微型電機,伺服，步進電機，編碼器設計 Designed for micro motors, servo motors, stepper motors, and encoders
結構特點 Structural features
無回轉間隙,適用于正反轉 Laser welding is used between the bellows and the shaft, with zero rotational clearance, suitable for forward and reverse rotation
波紋管彈性更有效的補償徑向，角向，軸向偏差 Bellows structure more effectively compensates for radial, angular, and axial deviations
一體化結構,夾緊螺絲緊固方式 Integrated structure, clamping screw fastening method
基本參數 Basic parameters and dimensions
參數 | 額定 | 容許 | 容許 | 容許軸 | 最高 | 靜態扭 | 慣性矩 | 主體 | 表面 | 重量 |
DIG-12×18.5 | 0.75 | 0.1 | 2 | ±0.2 | 11000 | 85 | 8.4×10ˉ? | Sus304不銹鋼 | 拋光處理 | 12 |
DIG-16×16 | 0.75 | 0.1 | 2 | ±0.2 | 9500 | 85 | 8.4×10ˉ? | 21 | ||
DIG-16×23 | 0.75 | 0.1 | 2 | ±0.2 | 9500 | 85 | 8.4×10ˉ? | 21 | ||
DIG-19×23 | 1.5 | 0.1 | 2 | ±0.2 | 9500 | 80 | 8.1×10ˉ? | 30 | ||
DIG-20×20 | 1.5 | 0.1 | 2 | ±0.2 | 7600 | 250 | 2.4×10ˉ? | 30 | ||
DIG-20×26 | 1.5 | 0.15 | 2 | ±0.2 | 7600 | 250 | 2.4×10ˉ? | 38 | ||
DIG-25×25 | 3 | 0.15 | 2 | ±0.2 | 6100 | 720 | 6.1×10ˉ? | 63 | ||
DIG-25×31 | 3 | 0.15 | 2 | ±0.2 | 6100 | 330 | 6.8×10ˉ? | 71 | ||
DIG-28.5×38 | 4.5 | 0.15 | 2 | ±0.2 | 5500 | 450 | 7.5×10ˉ? | 120 | ||
DIG-32×32 | 6 | 0.15 | 2 | ±0.2 | 5000 | 1300 | 2.1×10ˉ? | 130 | ||
DIG-32×41 | 6 | 0.15 | 2 | ±0.2 | 4800 | 850 | 2.6×10ˉ? | 160 | ||
DIG-38×41 | 9.5 | 0.2 | 2 | ±0.2 | 3800 | 900 | 7.7×10ˉ? | 250 | ||
DIG-40×50 | 9.7 | 0.2 | 2 | ±0.2 | 3500 | 850 | 8.5×10ˉ? | 354 | ||
DIG-40×56 | 9.7 | 0.2 | 2 | ±0.2 | 3500 | 850 | 8.6×10ˉ? | 400 |
注：必須在容許值的范圍內使用該聯軸器 Note: The coupling must be used within the allowable range
外形尺寸 Overall dimension
參數 | 常用d1,d2,軸徑 | φD | L | L1 | L2 | F | M | 緊固螺 |
DIG-12×18.5 | 2,3,4,5,6 | 12 | 18.5 | 0.55 | 1.3 | 3.5 | M3 | 0.7 |
DIG-16×16 | 3,4,5,6,6.35 | 16 | 16 | 0.55 | 1.3 | 3.6 | M3 | 0.7 |
DIG-16×23 | 3,4,5,6,6.35 | 16 | 23 | 0.55 | 1.3 | 3.6 | M3 | 0.7 |
DIG-19×23 | 3,4,5,6,6.35,7,8 | 19 | 23 | 0.55 | 1.4 | 3.6 | M3 | 0.7 |
DIG-20×20 | 4,5,6,6.35,7,8 | 20 | 20 | 0.55 | 1.4 | 3.6 | M4 | 1.7 |
DIG-20×26 | 4,5,6,6.35,7,8 | 20 | 26 | 0.6 | 1.4 | 3.6 | M4 | 1.7 |
DIG-25×25 | 5,6,6.35,7,8,9,9.525,10,11,12 | 25 | 25 | 0.6 | 1.7 | 3.6 | M4 | 1.7 |
DIG-25×31 | 5,6,6.35,7,8,9,9.525,10,11,12 | 25 | 31 | 0.8 | 1.8 | 4.3 | M4 | 1.7 |
DIG-28.5×38 | 6,6.35,8,9,9.525,10,11,12,12.7,14 | 28.5 | 38 | 0.8 | 2.1 | 4.3 | M4 | 1.7 |
DIG-32×32 | 8,9,9.525,10,11,12,12.7,14,15,16 | 32 | 32 | 0.8 | 2.3 | 6 | M5 | 4 |
DIG-32×41 | 8,9,9.525,10,11,12,12.7,14,15,16 | 32 | 41 | 0.8 | 2.3 | 6 | M5 | 4 |
DIG-38×41 | 10,11,12,12.7,14,15,16,17,18,19,20 | 38 | 41 | 0.8 | 2.3 | 7 | M6 | 8.4 |
DIG-40×50 | 10,11,12,12.7,14,15,16,17,18,19,20 | 40 | 50 | 0.8 | 2.3 | 8.5 | M6 | 8.4 |
DIG-40×56 | 10,11,12,12.7,14,15,16,17,18,19,20 | 40 | 56 | 0.8 | 2.3 | 8.5 | M6 | 8.4 |
在線客服