尼龍套鼓形齒式聯軸器(TGL)
簡要描述：RETZ進口尼龍套鼓形齒式聯軸器(TGL)其內齒圈材料采用MC尼龍材料，外齒軸套采用45號鍛鋼，具有尺寸小、重量輕、轉動慣量小、噪音小、裝拆方便、不用潤滑等優點
品牌：RETZ- 工況條件：聯接機械
- 溫度/壓力：40-270N.m.
- 更新時間：2023/03/27
進口尼龍套鼓形齒式聯軸器(TGL)產品用途 Product use
尼龍套鼓形齒式聯軸器使用環境溫度-25～+100℃，適用于各種機械工程和液壓領域，工程塑料和鋼的配合，免維護，可以補償軸向、徑向、角向誤差。可應用于中小轉矩的工況環境，例如風機、水泵、潤滑泵、紡織機械等。
The nylon sleeve drum shaped gear coupling is suitable for various mechanical engineering and hydraulic fields with an ambient temperature of - 25~+100 ℃. The combination of engineering plastics and steel is maintenance free and can compensate for axial, radial, and angular errors. It can be applied to small and medium torque operating environments, such as fans, water pumps, lubrication pumps, textile machinery, etc.
結構特點 Structural features
①設計選型時，要作扭矩的計算，并考慮轉矩變化，起動頻繁，環境條件，合理的選擇工況系數 When designing and selecting models, it is necessary to calculate the torque, take into account torque changes, frequent starting, and environmental conditions, and reasonably select the operating condition coefficient
②灰塵較大的場地，用C型結構較好 C-type structure is better for dusty sites
③裝配時勿將雜物留在腔內 Do not leave debris in the cavity during assembly
④裝配好后，內齒圈應能用手自由轉動 After assembly, the inner gear ring should be able to rotate freely by hand
⑤小規格可采用螺釘擰緊 Small specifications can be tightened with screws
基本參數 Basic parameters and dimensions
型號 | 主要尺寸 | 軸孔直徑 d1、d2 | 軸孔長度 L | 公稱扭矩 N·m | 許用轉速 rpm | 轉動慣量kg·m2 | 重量kg | 許用補償量 | ||||||||
D | B | S | 徑向 | 軸向 | 角向 | |||||||||||
A/B型 | C型 | A/B型 | C型 | A、B型 | C型 | A/B型 | C型 | mm | mm | ( °) | ||||||
TGL1 | 40 | — | 38 | — | 4 | 6,7 | 16 | 10 | 10000 | 0.00003 | — | 0.2 | — | 0.3 | ±1 | ±1 |
8,9 | 20 | |||||||||||||||
10,11 | 22 | |||||||||||||||
12,14 | 27 | |||||||||||||||
TGL2 | 48 | — | 38 | — | 4 | 8,9 | 20 | 16 | 9000 | 0.00006 | — | 0.278 | — | 0.3 | ±1 | ±1 |
10,11 | 22 | |||||||||||||||
12,14 | 27 | |||||||||||||||
16,18,19 | 30 | |||||||||||||||
TGL3 | 56 | 58 | 42 | 52 | 4 | 10,11 | 22 | 31.5 | 8500 | 0.00012 | 0.00015 | 0.428 | 0.533 | 0.4 | ±1 | ±1 |
12,14 | 27 | |||||||||||||||
16,18,19 | 30 | |||||||||||||||
20,22,24 | 38 | |||||||||||||||
TGL4 | 66 | 70 | 46 | 56 | 4 | 12,14 | 27 | 45 | 8000 | 0.00033 | 0.0004 | 0.815 | 0.869 | 0.4 | ±1 | ±1 |
16,18,19 | 30 | |||||||||||||||
20,22,24 | 38 | |||||||||||||||
25,28 | 44 | |||||||||||||||
TGL5 | 75 | 85 | 48 | 58 | 4 | 14 | 27 | 63 | 7500 | 0.00072 | 0.00088 | 1.39 | 1.52 | 0.4 | ±1 | ±1 |
16,18,19 | 30 | |||||||||||||||
20,22,24 | 38 | |||||||||||||||
25,28 | 44 | |||||||||||||||
30,32 | 60 | |||||||||||||||
TGL6 | 82 | 90 | 48 | 58 | 4 | 16,18,19 | 30 | 80 | 6700 | 0.0012 | 0.0015 | 2.02 | 2.15 | 0.4 | ±1 | ±1 |
20,22,24 | 38 | |||||||||||||||
25,28 | 44 | |||||||||||||||
30,32,35,38 | 60 | |||||||||||||||
TGL7 | 92 | 100 | 50 | 60 | 4 | 20,22,24 | 38 | 100 | 6000 | 0.0024 | 0.0027 | 3.01 | 3.14 | 0.4 | ±1 | ±1 |
25,28 | 44 | |||||||||||||||
30,32,35,38 | 60 | |||||||||||||||
40,42 | 84 | |||||||||||||||
TGL8 | 100 | 100 | 50 | 60 | 4 | 22,24 | 38 | 140 | 5600 | 0.0037 | 0.0039 | 4.05 | 4.18 | 0.4 | ±1 | ±1 |
25,28 | 44 | |||||||||||||||
30,32,35,38 | 60 | |||||||||||||||
40,42,45,48 | 84 | |||||||||||||||
TGL9 | 140 | 140 | 72 | 85 | 4 | 25,28 | 44 | 355 | 4000 | 0.0155 | 0.0166 | 8.25 | 8.51 | 0.6 | ±1 | ±1 |
30,32,35,38 | 60 | |||||||||||||||
40,42,45,48, 50,55,56 | 84 | |||||||||||||||
60,63,65,70 | 107 | |||||||||||||||
TGL10 | 175 | 175 | 95 | 95 | 6 | 30,32,35,38 | 60 | 710 | 3150 | 0.052 | 0.0535 | 16.92 | 17.1 | 0.7 | ±1 | ±1 |
40,42,45,48, 50,55,56 | 84 | |||||||||||||||
60,63,65,70,71,75 | 107 | |||||||||||||||
80,85 | 132 | |||||||||||||||
TGL11 | 210 | 210 | 102 | 102 | 8 | 40,42,45,48, 50,55,56 | 84 | 1250 | 3000 | 0.1624 | 0.165 | 34.26 | 34.56 | 0.8 | ±1 | ±1 |
60,63,65,70, 71,75 | 107 | |||||||||||||||
80,85,90,95 | 132 | |||||||||||||||
100,110 | 167 | |||||||||||||||
TGL12 | 270 | 270 | 135 | 135 | 10 | 50,55,56 | 84 | 2500 | 2120 | 0.4674 | 0.4731 | 66.42 | 66.86 | 1.1 | ±1 | ±1 |
60,63,65,70, 71,75 | 107 | |||||||||||||||
80,85,90,95 | 132 | |||||||||||||||
100,110,120,125 | 164 | |||||||||||||||
注：必須在容許值的范圍內使用該聯軸器 Note: The coupling must be used within the allowable range
在線客服