不銹鋼頂絲式剛性聯軸器(DN)
簡要描述：RETZ進口不銹鋼頂絲式剛性聯軸器(DN)采用一體化結構,高剛性,整體采用SU304不銹鋼材料，適應于剛性連接傳遞扭矩的工作場合
品牌：RETZ- 工況條件：聯接機械
- 溫度/壓力：0.3-6N.m.
- 更新時間：2023/03/28
進口不銹鋼頂絲式剛性聯軸器(DN) 產品用途 Product use
1.一體化結構,高剛性,整體采用SU304不銹鋼材料 Integrated structure, overall use of SU304 stainless steel material, high torque, high rigidity, basically no eccentricity allowed, must be fully adjusted during use
2.適應于剛性連接傳遞扭矩的工作場合 Suitable for working situations where rigid connections transmit torque
結構特點 Structural features
高扭矩，高剛性,基本上不允許偏心，使用時必須充分進行偏心調整 High torque, high rigidity, and basically no eccentricity is allowed. When using, it is necessary to fully adjust the eccentricity
定位螺絲緊固方式 Fastening method of positioning screw
基本參數 Basic parameters and dimensions
型號、參數 | 額定 | 容許 | 容許 | 容許軸 | 最高 | 慣性矩 | 軸套 | 表面 | 重量 |
DN-16x24 | 0.3 | — | — | — | 23000 | 4.39x10ˉ? | 高強度鋁合金 | 陽極氧化處理 | 10 |
DN-20x30 | 0.5 | — | — | 18000 | 1.25x10ˉ6 | 19 | |||
DN-25×36 | 1 | — | — | 一 | 14000 | 3.8x10ˉ? | 38 | ||
DN-32x41 | 2 | — | — | — | 11000 | 1.15x10ˉ? | 70 | ||
DN-40x44 | 4 | — | — | — | 4000 | 1.45x10-ˉ? | 118 | ||
DN-50x55 | 6 | — | — | — | 4000 | 2x10ˉ? | 235 |
注：必須在容許值的范圍內使用該聯軸器 Note: The coupling must be used within the allowable range
外形尺寸 Overall dimension
參數 | 常用d1,d2,軸徑 | FD | L | F | L1 | M | 緊固螺 |
DN-16x24 | 4,5,6,6.35,8 | 16 | 24 | 6 | 3.9 | M3 | 0.7 |
DN-20x30 | 5,6,6.35,8,9.5,10 | 20 | 30 | 7 | 4 | M3 | 0.7 |
DN-25x36 | 5,6,6.35,8,9.5,10,12 | 25 | 36 | 9 | 6.2 | M4 | 1.7 |
DN-32x41 | 6,6.35,8,9,9.5,10,12,12.7,14,15,16 | 32 | 41 | 10 | 7.2 | M5 | 4 |
DN-40x44 | 8,9,9.525,10,12,12.7,14,15,16,18,20 | 40 | 44 | 10.5 | 7.2 | M5 | 4 |
DN-50x55 | 10,11,12,12.7,14,15,16,19,20,22,24,25 | 50 | 55 | 13 | 9 | M6 | 4 |
在線客服