進口金屬管浮子流量計 產品用途 Product use

1.主要有三大部分組成：1.測量管體；2.錐形浮子；3.指示器，它可用來測量液體、氣體以及蒸汽的流量，特別適宜低流速小流量的介質流量測量 It mainly consists of three parts: 1. Measuring tube body; 2. Conical float; 3. Indicator, which can be used to measure the flow of liquid, gas, and steam, especially suitable for medium flow measurement with low flow rate and small flow rate

2.浮子的位移量與流量大小成正比，通過磁耦合系統，以不接觸方式，將浮子位移量傳給指示器指出流量大小 The displacement of the float is proportional to the flow rate. Through a magnetic coupling system, the float displacement is transmitted to the indicator in a non-contact manner to indicate the flow rate

3.也可配合不同的轉換器，將流量值轉換成標準的電遠傳信號如4-20mA It can also be combined with different converters to convert the flow value into a standard electrical remote transmission signal such as 4-20mA

4.實現距離遠傳顯示、記錄、積算和控制等功能 Achieve functions such as distance remote display, recording, integration, and control

5.具有特別的雙指示系統，雙行液晶數字顯示，耐高溫高壓 With a unique dual indicator system, dual line LCD digital display, high temperature and high pressure resistance

主要特點 Main features

1.采用了16位微處理工業化組件，保證了優良特性 Adopt 16 bit microprocessor industrial components to ensure excellent characteristics

2.適用于小口徑和低流速介質流量測量 Suitable for small diameter and low flow rate medium flow measurement

3.對于直管段要求不高 Low requirements for straight pipe sections

4.較寬的流量比10： 1  Wide flow ratio 10:1

5.雙行大液晶顯示，可同時顯示瞬時流量和累積流量 Dual line large LCD display, which can simultaneously display instantaneous flow and cumulative flow

6.單軸靈敏指示，非接觸磁耦合轉動 Single axis sensitive indication, non-contact magnetic coupling rotation

7.全金屬結構，適合于高溫，高壓和強腐蝕介質 All metal structure, suitable for high temperature, high pressure and strong corrosive media

8.可用于易燃、易爆危險場合 Can be used in flammable and explosive hazardous situations

9.可選二線制、電池、交流供電方式 Optional two-wire system, battery, AC power supply mode

10..多參數標定功能，帶有數據恢復，數據備份及掉電保護功能 Multi-parameter calibration function, with data recovery, data backup, and power down protection functions

技術參數 Technical parameter

結構示意圖 Structural diagram

安裝示意圖

1.安裝操作之前，應拆卸所有包裝，取出運輸中固定浮子的部件，并檢查有無損壞 

2.安裝到工藝管道之前，將管道里的焊渣清洗干凈，防止管道中雜質堵塞儀表，影響正常使用。

3.為了保證測量精度，推薦在流量計上游安裝5DN的入口直管段，下游安裝250mm出口直管段。

4.流量計有垂直安裝和水平安裝形式，如果是垂直安裝形式安裝垂直度應該保證優于1%，如果是水平安裝形式，安裝垂直度和水平度都應該保證優于1%。

5.若介質中含有固體雜質，應在閥門和直管段間加裝過濾器；若介質中含有鐵磁物質，應在流量計上游安裝磁過濾器。

6.由于金屬管浮子流量計安裝一個磁遠傳系統，要確保周圍其他設備產生的磁場不影響測量結果。

7.安裝在管道中的儀表不應受到壓力的作用，儀表的出入口應有合適的管道支撐，使儀表處于最小的應力狀態。

8.低溫介質測量時，需選夾套型。