(襯膠,無襯里)直通式隔斷閥
簡要描述:RETZ進口襯膠,無襯里直通式隔膜閥的結構為僅隔膜和閥體與流體接觸,適合含有粘性流體、纖維質流體、泥漿、污泥、懸浮固態物等的流體
品牌:RETZ
工況條件:開/關
溫度/壓力:P-T:16bar-80℃
更新時間:2022/09/07
(襯膠,無襯里)進口直通式隔斷閥 主要性能 Main performance
直通式隔膜閥流路近似直線狀(直通),具有壓力損失和積液少的結構。隔膜的一個作用是將驅動部結構與流體隔離開,另一個作用在于阻斷流體,通過在閥體內面的密封部將隔膜頂住或松開來進行流體控制 RETZ flow path of the straight diaphragm valve is approximately straight (straight), and has a structure with less pressure loss and liquid accumulation. One function of the diaphragm is to isolate the structure of the driving part from the fluid, and the other function is to block the fluid. The fluid is controlled by holding or releasing the diaphragm at the seal on the inner surface of the valve body
(襯膠,無襯里)進口直通式隔斷閥 技術性能規范 Technical performance specifications
特點∶ Performance characteristics
閥體與蓋被中間隔膜隔開,使得隔膜上方的閥蓋,閥桿等零件不受介質侵蝕 The valve body and cover are separated by the intermediate diaphragm, so that the bonnet, valve stem and other parts above the diaphragm are not corroded by the medium
1.氣密性優異 Excellent air tightness
驅動部通過隔膜隔離,因此無球閥、蝶閥之類的填料壓蓋部,無外部泄漏或外界空氣進入污染流體 The driving part is isolated by diaphragm, so there is no packing gland part such as ball valve and butterfly valve, and there is no external leakage or external air entering the polluted fluid
2.閥座零泄漏 Zero leakage of valve seat
可撓性隔膜將流體隔斷,因此閥座無泄漏 The flexible diaphragm blocks the fluid, so the valve seat has no leakage
采用橡膠隔膜時,即使流體內有些異物夾雜也能完全切斷 When using rubber diaphragm, even if there are some foreign matters in the fluid, it can be completely cut off
3.清洗性優異 Excellent cleaning performance
流體通路部采用流線型,不存在閥套部,因此可將積液降至最低,保持自凈性 The fluid passage is streamlined and there is no valve sleeve, so the accumulation of liquid can be minimized and self purification can be maintained
4..保養性優異 Excellent maintenance
采用“驅動部”、“隔膜”、“閥體”的三單元方式,拆解和裝配方便 The three unit mode of "drive part", "diaphragm" and "valve body" is adopted, which makes disassembly and assembly convenient
采用頂部入口結構,因此無需將閥從管道上拆下,只要將閥體和閥蓋的緊固螺栓和螺母卸下即可更換隔膜 The top inlet structure is adopted, so it is unnecessary to remove the valve from the pipeline. The diaphragm can be replaced by removing the fastening bolts and nuts of the valve body and bonnet
各單元具有兼容性,手動閥也能方便地改為自動化等方式 Each unit has compatibility, and manual valves can be easily changed to automation
技術性能規范 Technical performance specifications
設計標準 | HG/T 3704,GB/T 12239 | MSS-SP-88 | |||
結構長度 | HG/T 3704, GB/T 12221 | EN558-1 | |||
法蘭標準 | HG/T 20592,GB/T 9119 | ASME B16.5, JIS B2220 | |||
檢驗與試驗 | GB/T 13927.JB/T 9092 | API 598 | |||
公稱壓力(MPa | 0.6 | 10 | 1.6 | 15OLb | |
實驗壓力(MPa) | 殼體試壓 | 0.9 | 1.5 | 1.5 | 1.5 |
高壓密封 | 0.66 | 1.1 | 1.1 | 1.1 | |
低壓密封 | 0.6 | 0.6 | 0.6 | 0.6 | |
適用溫度(℃) | GxPO:-10~80 FEP:-30~150 PFA:-30~200 | ||||
1.閥體 | 鑄鐵、球墨鑄鐵、碳鋼、不銹鋼閥 | ||||
2.襯里 | 天然橡膠、氯丁橡膠、丁基橡膠、無襯里 | ||||
3.隔膜 | EPDM | ||||
4.閥瓣 | 鑄鐵、不銹鋼 | ||||
5.閥桿 | 碳鋼、不銹鋼 | ||||
6.閥蓋 | 鑄鐵、球墨鑄鐵、碳鋼、不銹鋼閥 | ||||
7.手輪 | 鑄鐵 |
流量特性圖 Flow characteristic diagram