(ANSI,API)進口美標隔膜閥 主要性能 Main performance

ANSI,API美標隔膜閥的啟閉件是一塊膜片，膜片是一種富有彈性的材料，用螺栓連接在閥桿上,操作時上下移動，當膜片上升時閥打開，當膜片下降時，閥關閉，隔膜閥適用于開關及節流之用retz品牌 ANSI, API American standard diaphragm valve is a diaphragm. The diaphragm is a flexible material, which is bolted to the valve stem. It moves up and down during operation. When the diaphragm rises, the valve opens. When the diaphragm falls, the valve closes. The diaphragm valve is suitable for switching and throttling

(ANSI,API)進口美標隔膜閥 技術性能規范 Technical performance specifications

特點∶ Performance characteristics

1.氣密好，無外部泄漏 Good air tightness and no external leakage

閥體與蓋被中間隔膜隔開，使得隔膜上方的閥蓋、閥桿等零件不受介質侵蝕。而且無外部泄漏或外界空氣進入污染流體 The valve body and cover are separated by an intermediate diaphragm, so that the bonnet, valve stem and other parts above the diaphragm are not corroded by the medium. And there is no external leakage or outside air entering the contaminated fluid

2.閥座零泄漏 Zero leakage of valve seat

可撓性隔膜將流體隔斷，因此閥座無泄漏  The flexible diaphragm blocks the fluid, so the valve seat has no leakage

采用橡膠隔膜時，即使流體內有些異物夾雜也能完全切斷 When using rubber diaphragm, even if there are some foreign matters in the fluid, it can be completely cut off

3.耐蝕性?耐化學性優異 Excellent corrosion resistance and chemical resistance

通過橡膠、氟樹脂等各種襯里閥體和豐富的隔膜材料相組合，可制造適合各種流體規格的閥，性價比優于特殊合金類材料 Through the combination of rubber, fluororesin and other lining valve bodies and abundant diaphragm materials, valves suitable for various fluid specifications can be manufactured, and the cost performance is better than that of special alloy materials

4..保養性優異 Excellent maintenance

采用“驅動部”、“隔膜”、“閥體”的三單元方式，拆解和裝配方便 The three unit mode of "drive part", "diaphragm" and "valve body" is adopted, which makes disassembly and assembly convenient

采用頂部入口結構，因此無需將閥從管道上拆下，只要將閥體和閥蓋的緊固螺栓和螺母卸下即可更換隔膜 The top inlet structure is adopted, so it is unnecessary to remove the valve from the pipeline. The diaphragm can be replaced by removing the fastening bolts and nuts of the valve body and bonnet

各單元具有兼容性，手動閥也能方便地改為自動化等方式  Each unit has compatibility, and manual valves can be easily changed to automation

結構 Structure

堰式隔膜閥：閥體內有一個屋脊形的隆起，隔膜與閥瓣接觸，閥桿上、下運動并且通過閥瓣帶動隔膜與屋脊接觸以達到隔斷通道的目的。隔膜與尾脊不接觸時具有一定節流作用，行程短對隔膜撓變要求較低，無淤積介質的死角  Weir diaphragm valve: there is a ridge shaped ridge in the valve body. The diaphragm contacts the valve disc. The valve rod moves up and down and drives the diaphragm to contact the ridge through the valve disc to block the passage. When the diaphragm is not in contact with the tail ridge, it has a certain throttling effect, short stroke, low requirements for diaphragm deflection, and no dead angle of silting media.

直通式隔膜閥：閥體內部似直管形，閥門全開時介質直流無阻。因此流體阻力小，切斷與流動能力佳，耐腐蝕切能包容顆粒狀介質 Straight through diaphragm valve: the inside of the valve body is like a straight pipe, and the medium is direct and unobstructed when the valve is fully opened. Therefore, the fluid resistance is small, the cutting and flow capacity is good, the corrosion resistance is high, and the granular medium can be contained

角式隔膜閥：進口與出口呈90度角，閥體內轉角處相當于堰式結構。具有改變介質90度流動方向的功能 Angle diaphragm valve: the inlet and outlet are at a 90 degree angle, and the inner corner of the valve body is equivalent to the weir structure. It has the function of changing the 90 degree flow direction of the medium

直流式隔膜閥：具有直流式截止閥和隔膜閥的特點。閥座與閥瓣密封，閥瓣上端有隔膜作為中法蘭密封和填料密封，又起隔開閥體和閥蓋作用，閥蓋部分不接觸介質。具有較高的承載能力和密封性能，流體流量呈線性，流通能力好，流阻小。但是結構復雜成本高，管道上安裝需要考慮手輪特殊方向的擦做空間 Direct flow diaphragm valve: it has the characteristics of direct flow stop valve and diaphragm valve. The valve seat is sealed with the valve clack, and the upper end of the valve clack is provided with a diaphragm as the middle flange seal and packing seal, which also serves to separate the valve body and the bonnet, and the bonnet part does not contact the medium. It has high bearing capacity and sealing performance, linear fluid flow, good flow capacity and small flow resistance. However, the structure is complex and the cost is high, and the wiping space in the special direction of the handwheel needs to be considered for installation on the pipeline

流量特性圖 Flow characteristic diagram

壓力溫度曲線 Pressure temperature curve