彈性套柱銷聯軸器
簡要描述：RETZ進口彈性套柱銷聯軸器結構簡單，安裝方便，更換彈性套容易，尺寸小，重量輕，適應正反轉多變，起動頻繁的場合
品牌：RETZ- 工況條件：聯接機械
- 溫度/壓力：4-15680N.m.
- 更新時間：2023/03/23
進口彈性套柱銷聯軸器 產品用途 Product use
1.廣泛用于載荷不大，由電動機驅動的各種中、小功率傳動軸系中，如減速機、起重機、壓縮機、輸送機、紡織機、卷揚機、球磨機 Widely used in various medium and small power transmission shafting systems driven by electric motors with small loads, such as speed reducers, cranes, compressors, conveyors, textile machines, hoists, and ball mills
2.如若安裝調整后能保持兩軸相對位移量在規定的范圍內，則聯軸器會有滿意的使用性能和較長的工作壽命 If the relative displacement of the two shafts can be maintained within the specified range after installation and adjustment, the coupling will have satisfactory service performance and long working life
3.安裝維修方便，適應正反轉多變，起動頻繁的場合 Convenient maintenance, suitable for occasions with variable forward and reverse rotation and frequent starting
4.工作溫度-20℃-+70℃ Operating temperature - 20 ℃ -+70 ℃
結構特點 Structural features
1.安裝底座剛性好、對中精度較高、沖擊載荷不 大、對減振要求不高的中小功率水泵等傳動 Transmission of medium and small power water pumps with good rigidity of the mounting base, high alignment accuracy, low impact load, and low vibration reduction requirements
2.有一定的補償兩軸之間的相對位移量和減震性能 There is a certain compensation for the relative displacement between the two shafts and the damping performance
3.結構簡單，安裝方便，更換彈性套容易，尺寸小，重量輕 Simple structure, convenient installation, easy replacement of elastic sleeve, small size, light weight
基本參數 Basic parameters and dimensions
型號 | 許用轉矩 | 許用轉速 | D | D1 | d1 | L | C | n-M | 重量 |
FCL90 | 4 | 4000 | 90 | 35.5 | 11 | 28 | 3 | 4-M8×50 | 1.7 |
FCL100 | 10 | 4000 | 100 | 40 | 11 | 35.5 | 3 | 4-M10×56 | 2.3 |
FCL112 | 16 | 4000 | 112 | 45 | 13 | 40 | 3 | 4-M10×56 | 2.8 |
FCL125 | 25 | 4000 | 125 | 50 | 13 | 45 | 3 | 4-M12×64 | 4 |
FCL140 | 50 | 4000 | 140 | 63 | 13 | 50 | 3 | 6-M12×64 | 5.4 |
FCL160 | 110 | 4000 | 160 | 80 | 15 | 56 | 3 | 8-M12×64 | 8 |
FCL180 | 157 | 3500 | 180 | 90 | 15 | 63 | 3 | 8-M12×64 | 10.5 |
FCL200 | 245 | 3200 | 200 | 100 | 21 | 71 | 4 | 8-M20×85 | 16.2 |
FCL224 | 392 | 2850 | 224 | 112 | 21 | 80 | 4 | 8-M20×85 | 21.3 |
FCL220 | 618 | 2550 | 250 | 125 | 25 | 90 | 4 | 8-M24×110 | 31.6 |
FCL280 | 980 | 2300 | 280 | 140 | 34 | 100 | 4 | 8-M24×116 | 44 |
FCL315 | 1568 | 2050 | 315 | 160 | 41 | 112 | 4 | 10-M24×116 | 57.7 |
FCL355 | 2450 | 1800 | 355 | 180 | 60 | 125 | 5 | 8-M30×50 | 89.5 |
FCL400 | 3920 | 1600 | 400 | 200 | 60 | 125 | 5 | 10-M30×150 | 113 |
FCL450 | 6174 | 1400 | 450 | 224 | 65 | 140 | 5 | 12-M30×150 | 145 |
FCL560 | 9800 | 1150 | 560 | 250 | 85 | 160 | 5 | 14-M30×150 | 229 |
FCL630 | 15680 | 1000 | 630 | 280 | 95 | 180 | 5 | 18-M30×150 | 296 |
注：必須在容許值的范圍內使用該聯軸器 Note: The coupling must be used within the allowable range
在線客服