首頁 > 產品中心 > RETZ瑞茨聯軸器 > 進口鼓形齒式聯軸器 > 齒式聯軸器(GCLD)

齒式聯軸器(GCLD)

簡要描述：RETZ進口齒式聯軸器(GCLD)齒式聯軸器是由齒數相同的內齒圈和帶外齒的凸緣半聯軸器等零件組成。外齒分為直齒和鼓形齒兩種齒形

品牌：RETZ
工況條件：聯接機械
溫度/壓力：1.12-50N.m.
更新時間：2023/03/27

聯系我們

產品詳情 在線咨詢

進口齒式聯軸器(GCLD) 產品用途 Product use 進口齒式聯軸器(GCLD)2.jpg

具有結構緊湊、回轉半徑小、承載能力大、傳動、噪聲低及維修周期長等優點，特別適用于低速重載工況，如冶金、礦山、起重運輸等行業、也適用于石油、化工、通用機械等各類機械的軸系傳動。

It has the advantages of compact structure, small turning radius, large bearing capacity, low transmission and noise, and long maintenance cycle. It is particularly suitable for low speed and heavy load working conditions, such as metallurgy, mining, lifting and transportation industries, and is also suitable for shafting transmission of various types of machinery such as petroleum, chemical engineering, and general machinery

結構特點 Structural features

將外齒制成球面，球面中心在齒輪軸線上，齒側間隙較一般齒輪大 The outer tooth is made into a spherical surface, with the spherical center on the gear axis, and the tooth side clearance is larger than that of ordinary gears

可允許較大的角位移（相對于直齒聯軸器），可齒的接觸條件，提高傳遞轉矩的能力，延長使用壽命 Allows for greater angular displacement (relative to straight tooth couplings), improves tooth contact conditions, improves torque transmission ability, and extends service life

有角位移時沿齒寬的接觸狀態 Contact state along tooth width with angular displacement

具有徑向、軸向和角向等軸線偏差補償能力 With radial, axial, and angular axis deviation compensation capabilities

基本參數 Basic parameters and dimensions

進口齒式聯軸器(GCLD)結構圖.jpg

塑號	公稱轉矩 Tn KN.m	連用特進 [m] (ramin)	軸孔直徑	軸孔長度L		D	.	.	C	C	H	A	.	B	.		轉動慣量 (kgm)	潤滑脂用量 (mL)
			d.d.d	Y	4.Z
			mm
GCLD1	1.12	4000	22.24	52	38	127	95	75	27	6	2	43	22	66	45	42	0.00875	107
			25.28	62	44												0.01025
			30.32.35,36	82	60												0.011
			40.42.45,46,50,55.56	112	84												0.01175
GCLD2	1.8	4000	38	82	60	149	116	90	26.5 33	6.5	2	49.5	24.5	70	49	42	0.02125	137
			40.42.45,48,50,55.56	112	87												0.02425
			60.63.65	142	107												0.0215
GCLD3	3.15	4000	40.42.45.48.50,55.56	112	84	167	134	105	33	7	2.5	53.5	27.5	80	54	42	0.04	201
			60,63.65,70.71,75	142	107												0.0475
GCLD4	5	4000	45.48,50,55.56	112	84	187	153	125	33.5 38	7.5	2.5	54	28	81	55	42	0.0725	238
			60,63.65,70,71,75	142	107												0.0825
			80.85.90	172	132												0.095
GCLD5	7.1	3750	50.55	112	84	204	170	140	37.5 43.5	7.5	2.5	60	30	89	59	42	0.1125	298
			60.63.65,70.71,75	142	107												0.1275
			808,590.95	172	132												0.145
			1001105)	212	167												0.1675
GCLD6	10	3300	55.56	112	84	230	186	155	43.5	8.5	3	68.5	33.5	106	71	47	0.1875	465
			60.63.65.70.71.75	142	107												0.21
			60.55.90.95	172	132												0.285
			100.110,(115)	212	167												02675
GCLD7	16	3000	60.63,65,70,71.75	142	107	256	212	180	48	9	3	73.5	34.5	112	73	47	0.375	561
			80.85,90.95	172	132												0.40
			100.110.120,125	212	167												0.4625
			130(135)	252	202												0.5275
GCLD8	22.4	2650	65.70.71.75	142	107	287	239	200	40.5 48	8.5	3.5	75	39	118	82	47	0.560	734
			80.85,90.95	172	132												0.6275
			100.110.120.125	212	167												0.72
			130,140,150	252	202												0.8125
GCLD9	35.5	2350	70.71.75	142	107	325	276	235	49.5 58	9.5	3.5	87.5	40.5	132	85	47	1.0775	956
			80.85.90.95	172	132												1.2075
			100.110,120.125	212	167												1.3825
			130,140,150	252	202												1.56
			160.170.175)	302	242												1.77
GCLD10	50	2100	75	142	107	362	313	270	65 68	11	4	98.5	44.5	149	95	49	1.97	1320
			80.85,90.95	172	132												2.0725
			100,110,120.125	212	167												2.38
			130.140.150	252	202												2.5625
			160.170,180	302	242												3.055
			190.200	352	282												3.4225

注：必須在容許值的范圍內使用該聯軸器 Note: The coupling must be used within the allowable range

產品名稱：

您的姓名：

聯系電話：

具體內容：

驗證碼：

產品中心

相關產品